Welder vs. Electrician Salary: Which Pays More?

Both trades open to people with a high school diploma, but one gates entry behind a four-or-five-year licensed apprenticeship — and the pay ranges show it.

By Marisol Tanaka-ReyesNov 15, 20268 min read

Quick answer

  • Electricians had a median annual wage of $63,190 in May 2025; welders, cutters, solderers and brazers had a median of $53,750 (U.S. Bureau of Labor Statistics, 2025).
  • Electricians pay more on average — the $63,190 electrician median sits above the $53,750 welder median (U.S. Bureau of Labor Statistics, 2025).
  • The ceiling differs more than the floor: the highest-paid 10 percent of electricians earned more than $108,510, against more than $77,530 for welders (U.S. Bureau of Labor Statistics, 2025).
Featured image for "Welder vs. Electrician Salary: Which Pays More?"

Electricians earn more on average. The median annual wage for electricians was $63,190 in May 2025, compared with $53,750 for welders, cutters, solderers and brazers (U.S. Bureau of Labor Statistics, 2025).

The two trades are much closer at the entry end than at the top. Which one pays you more depends on four specific things: whether your state licenses the trade, the industry you end up in, how much overtime your employer offers, and how far you go past the first qualification.

Pay Side by Side

All figures below are annual wages for the United States as a whole. "Entry-level" uses the lowest 10 percent, "experienced" uses the highest 10 percent, and the middle row is the median — the point where half the workers in the occupation earn more and half earn less.

Career stageWelders, cutters, solderers and brazersElectricians
Entry-level (lowest 10 percent)Less than $39,240 a year (U.S. Bureau of Labor Statistics, May 2025)Less than $42,640 a year (U.S. Bureau of Labor Statistics, May 2025)
Median (midpoint of the occupation)$53,750 a year (U.S. Bureau of Labor Statistics, May 2025)$63,190 a year (U.S. Bureau of Labor Statistics, May 2025)
Experienced (highest 10 percent)More than $77,530 a year (U.S. Bureau of Labor Statistics, May 2025)More than $108,510 a year (U.S. Bureau of Labor Statistics, May 2025)

Two cautions about reading that table.

First, these are wage figures for the occupation, not a description of your take-home pay. Both trades commonly add overtime, shift differentials and, on travel work, per-diem allowances on top of the base hourly rate. Ask any employer to state the base rate and the expected overtime hours separately before you compare two offers.

Second, the lowest and highest 10 percent are the edges of each range. For the middle, ONET OnLine publishes 25th and 75th percentile annual wages for welders, cutters, solderers and brazers, and for electricians, sourced to the BLS Occupational Employment and Wage Statistics program (ONET OnLine, 2025), along with the same percentiles expressed as hourly wages (O*NET OnLine, 2025). If you are paid by the hour, compare the hourly percentiles rather than converting the annual numbers yourself, because annual figures assume full-year work. For your own state or metro area, look up both occupations in the BLS Occupational Employment and Wage Statistics state tables or your state labor department's wage data.

Why the Pay Differs

The distance between a $53,750 welder median and a $63,190 electrician median (U.S. Bureau of Labor Statistics, 2025) comes down to three concrete differences.

1. Licensing and the length of the training route. Most states require electricians to pass a test and be licensed, with requirements varying by state; the BLS points readers to CareerOneStop for state licensing board details (U.S. Bureau of Labor Statistics, 2025). The usual route is a 4- or 5-year apprenticeship with about 2,000 hours of paid on-the-job training a year plus technical instruction (U.S. Bureau of Labor Statistics, 2025). Welders must be licensed in some states and localities but not all, and the BLS directs applicants to contact individual state or local licensing agencies (U.S. Bureau of Labor Statistics, 2025). Typical entry-level education for welders is a high school diploma or equivalent with moderate-term on-the-job training and no prior experience required (U.S. Bureau of Labor Statistics, 2025); for electricians it is a high school diploma or equivalent plus the apprenticeship (U.S. Bureau of Labor Statistics, 2025). A multi-year licensed gate limits how fast new workers can enter, and that supports the higher electrician median.

2. Workforce size and where demand is heading. There were 821,000 electrician jobs in 2025, against 437,700 welder, cutter, solderer and brazer jobs (U.S. Bureau of Labor Statistics, 2025). Electrician employment is projected to grow 9 percent from 2025 to 2035, much faster than the average for all occupations, with about 72,700 openings a year (U.S. Bureau of Labor Statistics, 2025). Welding employment is projected to grow 2 percent over the same period, slower than average, with about 40,300 openings a year (U.S. Bureau of Labor Statistics, 2025). Faster growth in a licensed trade pushes wages up.

3. Industry mix, which matters more for welders than the headline suggests. Among the top industries employing welders in May 2025, specialty trade contractors had a median annual wage of $59,440 (U.S. Bureau of Labor Statistics, 2025), above the $53,750 all-industry welder median (U.S. Bureau of Labor Statistics, 2025). Where you weld, and for whom, moves your pay more than the single national number implies.

One thing that is not a pay difference: OSHA requires welders to complete training on electrical safety as part of required safety training (U.S. Bureau of Labor Statistics, 2025). Electrical knowledge sits inside welding work too. It is the licensing and apprenticeship structure, not the subject matter, that separates the wage ranges.

Earnings Over a Career

At the start, the two trades sit close together. The lowest-paid 10 percent of welders earned less than $39,240 a year and the lowest-paid 10 percent of electricians less than $42,640 (U.S. Bureau of Labor Statistics, 2025). An apprentice electrician is paid during roughly 2,000 hours a year of on-the-job training (U.S. Bureau of Labor Statistics, 2025), so the choice is not between earning and studying — it is between two paid routes with different timelines.

The milestone that moves an electrician's pay is finishing the 4- or 5-year apprenticeship and passing the state licensing exam, since most states require a test and a license (U.S. Bureau of Labor Statistics, 2025). Clearing that gate is what carries someone from the bottom of the range, below $42,640, toward the $63,190 median (U.S. Bureau of Labor Statistics, 2025). Past that point the licensed tier keeps running: the highest-paid 10 percent of electricians earned more than $108,510 a year (U.S. Bureau of Labor Statistics, 2025), which is where supervisory work, contracting and specialised industrial or controls work sit.

For welders, the equivalent milestone is usually an industry move rather than a licence, because licensing applies only in some states and localities (U.S. Bureau of Labor Statistics, 2025). Moving into specialty trade contractor work lifts the reference point from the $53,750 all-industry median to the $59,440 median for that industry group in May 2025 (U.S. Bureau of Labor Statistics, 2025). From there, the highest-paid 10 percent of welders earned more than $77,530 (U.S. Bureau of Labor Statistics, 2025), typically through certified processes, pipe and pressure work, inspection roles, or travel jobs that pay per diem on top of the hourly rate.

So the gap widens as careers progress. The two trades are separated by a few thousand dollars at the lowest 10 percent, by the distance between $53,750 and $63,190 at the median, and by the distance between $77,530 and $108,510 at the highest 10 percent (U.S. Bureau of Labor Statistics, 2025). If you are weighing a long career, the electrician range has more room above the midpoint. If you want a full trade wage sooner without a four- or five-year apprenticeship, welding gets you working faster, and your choice of industry does much of the work the licence does on the other side.

Before you decide, check three things for your own situation: your state's electrician licensing requirements through its licensing board, whether your state or locality licenses welders, and current wage figures for both occupations in your state from the BLS Occupational Employment and Wage Statistics tables or your state labor department.

Frequently asked questions

Is a 4- or 5-year electrician apprenticeship worth it for the extra pay?

The median comparison is $63,190 for electricians against $53,750 for welders (U.S. Bureau of Labor Statistics, 2025), and the apprenticeship is paid, at about 2,000 hours of on-the-job training a year (U.S. Bureau of Labor Statistics, 2025). The stronger argument is the top of the range rather than the median: the highest-paid 10 percent of electricians earned more than $108,510, against more than $77,530 for welders (U.S. Bureau of Labor Statistics, 2025).

Can a welder out-earn an electrician?

Yes. The highest-paid 10 percent of welders earned more than $77,530 a year, which is above the $63,190 electrician median (U.S. Bureau of Labor Statistics, 2025). Industry is part of how welders get there: specialty trade contractors paid welders a median of $59,440 in May 2025, above the $53,750 all-industry welder median (U.S. Bureau of Labor Statistics, 2025).

Do the figures in the table include overtime?

Treat them as wage figures for the occupation rather than a forecast of your take-home pay. Both trades commonly add overtime, shift differentials and sometimes per diem on travel work on top of base pay, so a welder at the $53,750 median or an electrician at the $63,190 median (U.S. Bureau of Labor Statistics, 2025) may bank more than that in a heavy-overtime year — and less in a slow one. Ask employers for the base hourly rate and expected overtime hours separately.

Which trade has better job prospects?

Electricians, on the projections. Employment is projected to grow 9 percent from 2025 to 2035 with about 72,700 openings a year, against 2 percent growth and about 40,300 openings a year for welders, cutters, solderers and brazers (U.S. Bureau of Labor Statistics, 2025). That demand difference is part of why the electrician median of $63,190 sits above the welder median of $53,750 (U.S. Bureau of Labor Statistics, 2025).

Sources

  1. U.S. Bureau of Labor Statistics — Welders, Cutters, Solderers, and Brazers : Occupational Outlook Handbook (2025)
  2. U.S. Bureau of Labor Statistics — Electricians : Occupational Outlook Handbook (2025)

Written by

Marisol Tanaka-Reyes

Marisol steers Jobladderhq's coverage of hiring trends and the strange rituals of modern recruiting. She's drawn to the gap between what job ads promise and what the work actually feels like. Her editing hand favors clarity over jargon, always.