Welder Pay: Average Salary, Range, and What Affects It

Welding wages sit in a wide band, and this guide shows how to read the official percentile tables for your own state, metro and industry.

By Desmond OkaforNov 15, 20269 min read

Quick answer

  • The median annual wage for welders, cutters, solderers and brazers was $53,750 in May 2025 (U.S. Bureau of Labor Statistics, 2025).
  • Entry-level to experienced spans a wide published band: under $39,240 a year at the 10th percentile and over $77,530 at the 90th (U.S. Bureau of Labor Statistics, 2025).
  • Those are wage figures, not package totals — overtime hours, shift differentials, per diem and travel pay sit on top and vary by employer.
Featured image for "Welder Pay: Average Salary, Range, and What Affects It"

Welders, cutters, solderers and brazers had a median annual wage of $53,750 in May 2025 (U.S. Bureau of Labor Statistics, 2025). The spread around that midpoint is wide: the lowest-paid 10 percent earned less than $39,240 a year and the highest-paid 10 percent earned more than $77,530 (U.S. Bureau of Labor Statistics, 2025).

Where you land inside that band comes down to your experience and skill level, the industry you weld in, the size of the company, and the state or metro area you work in (U.S. Bureau of Labor Statistics, 2025). This guide explains what each published figure covers and where to look up the current number for your own area.

What This Job Pays

The median annual wage for welders, cutters, solderers and brazers was $53,750 in May 2025 (U.S. Bureau of Labor Statistics, 2025). Median means the middle of the occupation: half earned more, half earned less. It is not a starting rate, and it is not an average of the best-paid jobs.

The BLS publishes the same 2025 median in per-hour terms as well as annual terms (U.S. Bureau of Labor Statistics, 2025), and ONET OnLine republishes the national median in both hourly and annual form using the same BLS wage data (ONET OnLine, 2025). If a shop quotes you an hourly rate, the hourly version of the BLS figure is the cleaner comparison.

The range matters more than the midpoint. The lowest-paid 10 percent of welders earned less than $39,240 a year and the highest-paid 10 percent earned more than $77,530 (U.S. Bureau of Labor Statistics, 2025). ONET OnLine, drawing on BLS wage data, shows the same top-decile threshold of $77,530 or more and reports $53,750 as the national figure for the occupation (ONET OnLine, National Center for O*NET Development, 2025).

Be clear about what these numbers include before you hold an offer against them. They are wage figures for the occupation, reported hourly and annually. They do not tell you how much overtime a particular shop runs, whether it pays a night or weekend differential, whether it pays per diem and travel on road jobs, or whether it runs a production bonus. Two welders on the same hourly rate can end a year far apart because of those items, so treat $53,750 (U.S. Bureau of Labor Statistics, 2025) as the wage benchmark and ask each employer separately how overtime, premiums and travel pay are handled.

Salary by Experience and Location

The BLS publishes national percentiles for the occupation; O*NET and CareerOneStop publish state and metro versions of the same data. Use the national rows as your experience ladder, then look up your own area.

Level or placePublished figureSource and year
Entry level (10th percentile, US)Less than $39,240 a yearU.S. Bureau of Labor Statistics, May 2025
Mid-career (national median)$53,750 a yearU.S. Bureau of Labor Statistics, May 2025
Experienced (90th percentile, US)More than $77,530 a yearU.S. Bureau of Labor Statistics, May 2025
Washington stateState average annual wage, with 10th and 90th percentile figuresO*NET OnLine, using BLS wage data, 2025
ConnecticutState average annual wage, with 10th and 90th percentile figuresO*NET OnLine, using BLS wage data, 2025
NebraskaState average annual wage, with 10th and 90th percentile figuresO*NET OnLine, using BLS wage data, 2025
New York–Newark–Jersey City, NY-NJ metroMetro annual wage percentiles, reported alongside the US figuresCareerOneStop (U.S. Department of Labor), from BLS OEWS, May 2024
Miami–Fort Lauderdale–West Palm Beach, FL metroMetro annual wage percentiles for the occupationCareerOneStop (U.S. Department of Labor), from BLS OEWS

A first welding job in a production shop usually sits in the lower part of the national range, nearer the under-$39,240 10th percentile than the $53,750 median (U.S. Bureau of Labor Statistics, 2025). Welders with several years of clean work, more than one process and the ability to pass a test on the material a shop actually runs tend to cluster around the median. The over-$77,530 top decile is generally reached through harder work settings, higher-paying industries, heavy overtime availability and lead roles (U.S. Bureau of Labor Statistics, 2025).

For state figures, open the wage section of the ONET OnLine page for welders, cutters, solderers and brazers and switch the state selector to Washington, Connecticut, Nebraska or wherever you live (ONET OnLine, 2025). For metro detail — New York–Newark–Jersey City or Miami–Fort Lauderdale–West Palm Beach, for example — CareerOneStop publishes annual wage percentiles using BLS OEWS data (CareerOneStop, U.S. Department of Labor). Both show a low, median and high figure, which is more useful than a single average.

What Affects Pay in This Field

The BLS states that pay in this occupation varies with the worker's experience and skill level, the industry, and the size of the company (U.S. Bureau of Labor Statistics, 2025). Here is what each looks like in the published figures.

  • Experience and skill level. The single biggest lever. The occupation runs from under $39,240 a year at the 10th percentile to over $77,530 at the 90th, against a median of $53,750 (U.S. Bureau of Labor Statistics, 2025).
  • Processes and test results. Welders usually move from the under-$39,240 end toward the $53,750 median by adding processes, positions and materials they can be tested on (U.S. Bureau of Labor Statistics, 2025). A shop pays for work it can hand you, not for a certificate in isolation.
  • Industry. The BLS Occupational Outlook Handbook lists specialty trade contractors and manufacturing among the top-paying industries for this occupation (U.S. Bureau of Labor Statistics, 2025). The same skill can sit near the $53,750 median in one industry and nearer the $77,530 top-decile mark in another (U.S. Bureau of Labor Statistics, 2025).
  • Company size. The BLS names company size as a factor in pay here (U.S. Bureau of Labor Statistics, 2025). Larger employers more often have formal pay steps and shift premiums; small shops more often set rates individually.
  • Location. The $53,750 national median (U.S. Bureau of Labor Statistics, 2025) averages very different local markets. ONET publishes separate average and percentile wages for states including Washington, Connecticut and Nebraska (ONET OnLine, using BLS wage data, 2025), and CareerOneStop publishes metro percentiles for areas such as New York–Newark–Jersey City and Miami–Fort Lauderdale–West Palm Beach (CareerOneStop, from BLS OEWS).
  • Overtime, shift and travel pay. None of the published medians tells you how many hours a shop runs. A job at the $53,750 median (U.S. Bureau of Labor Statistics, 2025) with steady overtime and per diem can out-earn a higher base rate on a flat 40-hour week. Ask for scheduled hours, the overtime rule, the shift differential and the travel policy in writing.

How This Job's Pay Compares

Welding pay is best judged against the occupations people actually weigh it against, and the BLS publishes these medians in the same 2025 edition, so the comparison is like for like.

Welders, cutters, solderers and brazers: $53,750 median annual wage, May 2025 (U.S. Bureau of Labor Statistics, 2025).

All occupations nationally. The BLS publishes a median annual wage for all occupations as its standard benchmark (U.S. Bureau of Labor Statistics, 2025). Pull that figure from the same Occupational Outlook Handbook page and set it beside $53,750 to see whether welding sits above or below the typical American job this year.

Machinists, and tool and die makers. The BLS reports a median annual wage for machinists, a median for tool and die makers, and a combined median for the two as a group (U.S. Bureau of Labor Statistics, 2025). These are the usual cross-shops for people already in a metal trade, because the training routes overlap.

Metal and plastic workers. The BLS also reports a median annual wage for the wider metal workers and plastic workers group (U.S. Bureau of Labor Statistics, 2025). Welding sits inside that group, so the comparison shows whether it pays above or below the broader metal trades.

One caution: a median is a midpoint, not a ceiling. Welding's own spread runs from under $39,240 to over $77,530 (U.S. Bureau of Labor Statistics, 2025), and a related occupation with a higher median may still have a narrower top end. Read the 90th percentile on each page, not just the middle number.

Frequently asked questions

Is welding paid hourly or as a salary?

Most welding work is paid hourly, and the BLS publishes the 2025 median for welders, cutters, solderers and brazers in both per-hour and annual terms (U.S. Bureau of Labor Statistics, 2025); the annual version is $53,750 (U.S. Bureau of Labor Statistics, 2025). O*NET also shows the national median in hourly and annual form (O*NET OnLine, 2025). Convert any offer to an hourly rate before comparing, then confirm separately how overtime, shift differentials, per diem and any production bonus are paid, because none of those is in the published wage figure.

How much more do experienced welders earn than beginners?

On the national figures, the lowest-paid 10 percent earned under $39,240 a year and the highest-paid 10 percent earned over $77,530 in May 2025, around a median of $53,750 (U.S. Bureau of Labor Statistics, 2025). How fast you move up that band is driven by your experience and skill level, the industry you work in and the size of your employer, which the BLS names as the factors behind pay variation in this occupation (U.S. Bureau of Labor Statistics, 2025).

Which industries pay welders the most?

The BLS Occupational Outlook Handbook lists specialty trade contractors and manufacturing among the top-paying industries for welders, cutters, solderers and brazers (U.S. Bureau of Labor Statistics, 2025). Industry can move you a long way inside a range running from under $39,240 to over $77,530 nationally (U.S. Bureau of Labor Statistics, 2025), so read the industry wage table on that page rather than relying on the $53,750 national median alone.

Does welding pay more in some states than others?

Yes, and the differences are published rather than guessed at. O*NET OnLine reports separate average annual wages with 10th and 90th percentile figures for states including Washington, Connecticut and Nebraska, using BLS wage data (O*NET OnLine, 2025). CareerOneStop publishes annual wage percentiles at metro level, including the New York–Newark–Jersey City, NY-NJ area from BLS OEWS data for May 2024 and the Miami–Fort Lauderdale–West Palm Beach, FL area (CareerOneStop, U.S. Department of Labor). Compare your local median with the national $53,750 (U.S. Bureau of Labor Statistics, 2025).

Do I need a degree to earn the median welding wage?

The BLS lists the typical entry-level education for welders, cutters, solderers and brazers in the Quick Facts box of its Occupational Outlook Handbook page (U.S. Bureau of Labor Statistics, 2025) — check that line directly, since it is the authoritative statement of the normal entry route. Within the occupation, pay tracks experience and skill level, industry and company size rather than academic credentials (U.S. Bureau of Labor Statistics, 2025).

Is welding a growing field?

The BLS reports the number of jobs nationally for welders, cutters, solderers and brazers and describes the outlook from 2025 to 2035 as slower than average growth (U.S. Bureau of Labor Statistics, 2025). Slower growth does not mean no openings, since replacement hiring drives most vacancies in established trades, but it is a reason to check demand in your own state and metro on CareerOneStop alongside the wage percentiles.

Sources

  1. U.S. Bureau of Labor Statistics — Welders, Cutters, Solderers, and Brazers : Occupational Outlook Handbook (2025)
  2. O*NET OnLine (National Center for O*NET Development, using BLS wage data) — National Wages: 51-4121.00 - Welders, Cutters, Solderers, and Brazers (2025)

Written by

Desmond Okafor

Desmond writes about the mechanics of job searching: resumes, interviews, the long silence after applying. He's fascinated by how much of getting hired depends on luck dressed up as skill.