Welder Cover Letter: Examples and How to Write One
How to open the letter, which processes and positions to name, and how to prove your certifications before a shop ever watches you run a bead.
Quick answer
- Address the letter to a named person, or to the job title such as 'Maintenance Supervisor' — never 'To Whom It May Concern' (CareerOneStop, U.S. Department of Labor).
- Name processes and positions in the posting's own words: Jobscan's State of the Job Search 2025 report says 99.7% of recruiters use applicant tracking keyword filters to sort applicants.
- Close by saying your resume is enclosed, asking to meet or test, and naming the date you will follow up (CareerOneStop, U.S. Department of Labor).

A welder cover letter has one job: tie the processes, positions and certifications on your resume to the work in the posting, in about 200 to 400 words across three or four short paragraphs (CareerOneStop, U.S. Department of Labor). Name the process — MIG, TIG, stick, flux-cored — the positions you weld in, your material and thickness range, and the certification record behind it.
What a shop screens for varies by employer, state and sector: a structural fabricator, a food-grade stainless shop and a refinery maintenance contractor weigh those details differently, so read the posting before you write a word.
What Hiring Managers Look For
Your letter gets read twice: once by software, once by a supervisor with a production schedule to keep.
The software pass is keyword matching. Jobscan's State of the Job Search 2025 report says 99.7% of recruiters use keyword filters in their applicant tracking system to sort and prioritize applicants, so the process names from the posting must appear in your letter in the same form — GMAW and MIG, GTAW and TIG, SMAW and stick, FCAW and flux-cored.
The human pass is fast. A 2012 eye-tracking study by the job site TheLadders, reported by MarketingProfs, found recruiters spent about six seconds deciding whether a resume deserved a closer read, focusing mainly on six data points: name, current title and company, previous title and company, position dates, and education. Your first two lines have to do the same work — the exact job title you want, and your strongest process-and-position match.
After that, a shop supervisor scans for four things: the positions you weld in (flat, vertical or overhead are core tasks ONET OnLine lists for this occupation), material type and thickness, whether you can read a Welding Procedure Specification and set fit-up, and current certification status. Use the employer's own job title — ONET OnLine lists reported titles including Fabrication Welder, Maintenance Welder, MIG Welder, TIG Welder and Welder Fitter. Requirements differ by shop and by state, so mirror the posting instead of a template.
How to Build It Section by Section
1. Fix the address line first. CareerOneStop (U.S. Department of Labor) advises addressing the letter to a specific person, and if no name is listed, using the recipient's job title or 'Human Resources' rather than a business or department. - Before: To Whom It May Concern - After: Dear Maintenance Supervisor 2. Open with the reason for writing, the job title and where you saw it, which is what CareerOneStop says paragraph one should do. - Before: I am writing to express my interest in opportunities at your company. - After: I am applying for the Welder Fitter position (req. 4412) posted on your careers page on March 3. 3. Put your strongest process-and-position match in paragraph two, with a number a foreman can picture. - Before: I have experience with several welding processes. - After: I run GMAW and FCAW on 3/16" to 1/2" carbon steel in flat, vertical and overhead positions, averaging 42 fabricated frames per shift. 4. Prove the certification instead of asserting it. In the AWS Certified Welder program, the welder deposits a sound weld at a scheduled appointment inspected by an AWS Certified Welding Inspector, including the ability to follow the Welding Procedure Specification for fit-up, assembly and positioning (American Welding Society). - Before: I am a certified welder. - After: I hold an AWS Certified Welder qualification tested to a WPS on 3G and 4G plate; certificate numbers are on page two of my resume. 5. Name inspection work. ONET OnLine lists examining workpieces for defects and measuring them with straightedges or templates among this occupation's core tasks. - Before: I care about quality. - After: I check every weldment against the print with a straightedge and weld gauge before paint, holding a 1.2% reject rate last quarter. 6. Close with three moves — resume enclosed, a request to meet, a follow-up plan (CareerOneStop). - Before: Thank you for your time and consideration. - After: My resume is enclosed. I would welcome a weld test at your shop and will call on Tuesday, March 18. 7. Cut it to length, then make it yours. CareerOneStop suggests about 200 to 400 words in three or four short paragraphs on one page, and says drafting with an AI tool is fine provided you edit it into your own voice. Swap passionate about craftsmanship for I have run 6" pipe spool layout for four years and set fit-up to a 1/16" gap without a tack jig.*
Sample Bullets and Cover Letter Lines
Production MIG
Resume bullet — fabrication shop
Welded GMAW fillet and lap joints on 10-gauge to 1/2" carbon steel frames, producing 42 units per shift against a 35-unit standard for 14 months.
TIG stainless
Resume bullet — food-grade shop
Ran GTAW root and cap passes on 304 stainless tube to a sanitary finish, passing 118 of 120 borescope inspections in one year.
Out-of-position work
Resume bullet — structural
Completed vertical-up and overhead FCAW welds on 1/2" beam-to-column connections across a nine-month build with zero repairs flagged by the third-party inspector.
Inspection and layout
Resume bullet — quality
Checked 60 weldments per week against prints using straightedges, templates and a fillet gauge, cutting rework from 11 hours to 3 hours a week.
Maintenance callouts
Resume bullet — plant maintenance
Repaired cracked conveyor frames on night shift with SMAW, returning the line to production in 90 minutes against a 4-hour callout average.
Safety record
Resume bullet — hot work
Led weekly hot-work permit checks for a six-welder crew over 24 months with no recordable incidents and no failed fire-watch audits.
Cover letter opening
Paragraph one
I am applying for the Maintenance Welder position (req. 2290) listed on your careers page on April 2. I hold an AWS Certified Welder qualification and have run SMAW and FCAW repairs in a two-line packaging plant for three years, averaging under two hours per emergency callout.
Cover letter proof line
Paragraph two
Your posting asks for overhead pipe repair on 4" to 8" schedule 40. I qualified in the 6G position to a Welding Procedure Specification and completed 210 field repairs last year with a 2% cut-out rate.
Cover letter closing
Paragraph three
My resume is enclosed, including certificate numbers and expiry dates. I can test on your equipment any weekday morning and will call the shop office on Thursday, April 11, to follow up.
Before You Submit
Answer yes to every line before you send it.
- Is the letter one page and between 200 and 400 words, in three or four paragraphs (CareerOneStop, U.S. Department of Labor)?
- Is it addressed to a named person, or to a job title such as 'Maintenance Supervisor' or 'Human Resources' rather than 'To Whom It May Concern' (CareerOneStop)?
- Does paragraph one name the exact job title, any requisition number, and where you saw the opening?
- Do the process abbreviations used in the posting (GMAW, GTAW, SMAW, FCAW) appear in your letter in the same form?
- Have you named the positions you weld in — flat, vertical, overhead, or pipe positions such as 2G or 6G?
- Does every achievement sentence contain a number, a percentage or a named outcome?
- Are certificate numbers and expiry dates listed, with renewal cycles noted where they apply — the AWS Certified Welding Inspector credential, for example, must be renewed every three years (DoD COOL)?
- Does the final paragraph say your resume is enclosed, ask to meet or test, and name the date you will follow up (CareerOneStop)?
- Is the file saved as a PDF named Lastname_Firstname_Welder_CoverLetter.pdf, unless the posting asks for another format?
- Are your phone number and email in the header, identical to the ones on your resume?
- Is the body text in the same font family and size as your resume on every line?
- Have you compared the company name, recipient's name and job title letter by letter against the posting?
Frequently asked questions
How long should a welder cover letter be?
About 200 to 400 words in three or four short paragraphs, on one page (CareerOneStop, U.S. Department of Labor). For a production shop, use three: the position you want, your processes and positions with numbers, and your follow-up plan.
PDF or Word document?
Send a PDF unless the posting or application form asks for .doc or .docx, or gives you a plain-text box. PDF keeps your spacing and font intact when a supervisor prints it in the shop office.
Do I need a cover letter if I already hold certifications?
Send one. The certificate shows you deposited a sound weld to a Welding Procedure Specification under an AWS Certified Welding Inspector (American Welding Society). The letter says which positions, materials and thicknesses you work in and that you are available to test.
When should I follow up?
Name a date in your closing paragraph, about one week after you apply, then call the shop that day and ask for the hiring supervisor by title. CareerOneStop advises stating a follow-up plan in the final paragraph.
How do I check pay before I mention it?
Leave pay out of the letter unless the posting asks for a figure. Check current wage data for your state and metro area in the U.S. Bureau of Labor Statistics Occupational Outlook Handbook and CareerOneStop's salary tools, then give a range rather than one number.
Sources
- O*NET OnLine — 51-4121.00 - Welders, Cutters, Solderers, and Brazers (2026)
- DoD Credentialing Opportunities On-Line (COOL) — CWI by IIW Waiver



